Cairo - Satin Nickel

Why not add a touch of drama to your staircase?

• The Cairo stair rod design gives a nod to the architectural design of onion domes with its ornate finials either end.
• These stair rods are available as 16mm diameter rods only.
• Suitable for fitting on stair runners and full fitted stair carpets.
• High quality hollow carpet rods, offered in ten metal finishes: polished, antique or satin brass, antique bronze, polished chrome, brushed chrome, satin and polished nickel, pewter and black.
• Choice of reeded or plain rod.
• Made-to-measure to fit your stairs.
• Supplied with a pair of matching-finished stair rod brackets with screws, suitable for installation with carpets or natural flooring fitted with underlay. The 16mm (5/8”) brackets have a 16mm clearance.
• Protective finish – easy to wipe clean.
• It is important to note that, like other stair runner rods, the Cairo stairrods are purely decorative and do not fix the carpet to the stairs; a stair runner must be secured by another means of installation such as gripper.

Tips on fitting Cairo stair rods

• The stair rod brackets are supplied with No. 6 screws: drill a pilot hole before fixing the brackets to the staircase, then drill a 4mm clearance hole for the screw shank. It is suggested for softwood: drill a 2.5mm pilot hole and hardwood a 3mm pilot hole. To avoid damaging the screws it is suggested you use a low drill speed.
• Runner rods brackets are hinged: separate, by sliding the top from the bottom of the bracket to reveal the screw holes. Fit the bottom section first, and then place the rod in before sliding the top bracket section into place and securing with the supplied domed-head screw.
• Fitted carpet Front Fix brackets: place the rod on the stair carpet and place the Front Fix brackets over the rod face, screwing them through the carpet. We recommend that you leave at least a 25-50mm gap between the stringboard (side of staircase) and tip of the rod, on both sides of the staircase.
• Fitting a stairrod to the bottom step (hall or landing level) is a popular option, as it helps to complete the look and creates a sense of flow from top to bottom of the house.

What length to order

• For runner stair carpets choose the RUNNER option: add around 150mm (around 6”) to the width of your runner to give you the tip-to-tip measurement of stair rod to order. For example: if your runner is 2000mm wide then you would order 2150mm length rods. Note: the tip-to-tip measurement you order INCLUDES the finials.
• For fitted carpets choose the FRONT FIX option:we recommend that you leave at least a 25-50mm gap between the stringboard (side of staircase) and tip of the rod, on both sides of the staircase.