Premier Single 13 - Pewter

Choose from ten attractive metal finishes

• The Premier Single 13 door thresholds are an elegant and secure way to join extra thick carpet (13mm-18mm) to a thinner floorcovering such as vinyl, LVT, Amtico or bare floorboards.
• Features a smooth, curved edge to slope down to the vinyl or floor boards.
• The two floors should be level with each other as the Single 13 needs to lie flat. However, if your underlays are different thicknesses, stack the Easywedges (included free of charge) underneath the Single 13 at the fixing points and raise the base.
• The carpet is gripped under tension by the teeth, whilst on the other side the floorcovering edge lies under the Single 13. This means no raw edges or rucked-up carpet.
• The Single 13 is suitable for most qualities of thick or dense carpet which compress to around 13mm. The underlay is cut short of the door bar and does not influence the type of door threshold you purchase. For more standard thicknesses of carpet see the Single 9 and for thin carpets and sisals see the Single 4.
• Made with a solid brass bar, with rounded edges, in a choice of 10 smart, unlacquered metal finishes.
• Available in 4 different lengths which you can cut to the right length for your join: 900mm, 1000mm, 1800mm and 2700mm.
• Also known as Premier Trim Single or a Single Naplock.

Fitting of the Premier Single 13 door thresholds

• Cut to length with a sharp hack-saw.
• Stick, using a propriety adhesive, nail or screw (avoiding any underfloor heating).
• The underlay stops short of the door threshold.
• Use supplied Easywedges (3mm thick strips), if required, by slipping under fixing points.
• Thick carpets can be compressed onto the pins before napping down (see above).
• Once fitted, Premier Door Bars Single 13 can be 'napped down' with a carpeted wood block, which will give the carpet an extra firm grip on the pins and can reduce the height by 2-4mm.

Width options