Premier Floating Vinyl Edge - Polished Brass

Create a smooth and safe transition

• The Premier Floating Vinyl Edge joins non floating and floating floorcoverings, including timber, laminates, vinyl, LVT, WPC and SPC. The manufacturer of your flooring will indicate if your floorcovering is floating or not (floating types of flooring expand and contract marginally and need the space to do this).
• There is a choice of two options: the 1mm or 2mm, allowing for a slight difference in height between the two floors to be joined. If your height difference is more than 2mm take a look at the 2 Way Ramps and the Ramps.
• The design of the threshold is neat at just 20mm wide with a curved edge on the lower flooring side for safety.
• Only use if the floor you are fixing to is non porous.
• Self-adhesive strip on underside of top section strongly sticks the Premier Floating Vinyl Edge to the higher floor. No screws, therefore ideal where underfloor heating could be an issue.
• Made in a choice of 10 smart, unlacquered metal finishes.
• Available 900mm, 1000mm, 1800mm and 2700mm long.

Premier Trim Vinyl Edge fitting tips

• Cut to length with a sharp hack-saw.
• Make sure the floorcovering is clean and dry and degreased before sticking down the Vinyl Edge.
• For information about how much your flooring may expand, please refer to the manufacturer of the flooring.
• Peel off the backing strip and stick down to the higher flooring surface, allowing the necessary space for maximum expansion.

Size options

• Internal Height : 1mm
• Internal Height: 2mm